Step 5: Drill the bucket

drill the bucket
Photo: Kristine Larsen
«»
Place the wood disk on the bucket's underside, and mark where to drill holes in the metal bottom. Remove the disk and bore the holes.
Ask TOH users about Salvage

Contribute to This Story Below

    Tools List

    • Natural Bristle Brush
      brush
    • pencil compass
      compass
    • jigsaw
      jigsaw
    • table vise
      vise
    • drill
      drill/driver
    • ratchet wrench
      ratchet

    Shopping List

    1. 3 Cast-iron Bathtub Feet, from salvage yards like Zaborski Emporium

    2. Clear Polyurethane

    3. Galvanized-tin Flower Bucket

    4. ¾-inch Plywood5. 2-inch Bolts with Nuts

    6. duct tape

    7. White Paint

    8. rag