Step 2: Cut the Mounting Disk

cut the mounting disk
Photo: Kristine Larsen
«»
Trace the circle on a piece of ¾-inch plywood, and use a jigsaw to cut out the disk. This will be fixed to the bottom of the bucket and provide a stable surface on which to mount the feet.
Ask TOH users about Salvage

Contribute to This Story Below

    Tools List

    • Natural Bristle Brush
      brush
    • pencil compass
      compass
    • jigsaw
      jigsaw
    • table vise
      vise
    • drill
      drill/driver
    • ratchet wrench
      ratchet

    Shopping List

    1. 3 Cast-iron Bathtub Feet, from salvage yards like Zaborski Emporium

    2. Clear Polyurethane

    3. Galvanized-tin Flower Bucket

    4. ¾-inch Plywood5. 2-inch Bolts with Nuts

    6. duct tape

    7. White Paint

    8. rag