Step 7: Grade your Work

grade your work
Photo: Wendell T. Webber
«»
Pour 1 inch of leveling sand over the base. Using a garden rake, smooth the sand and even out the field until the sand is 1½ inches below the patio finish height. Keep track of the grading by checking the depth against the mason's lines.

TOH Pro Tip: To keep dust down, spray the paver base lightly with a hose before tamping it.
Ask TOH users about Patio

Contribute to This Story Below

    Tools List

    • angle grinder
      grinder
    • brick hammer
      brick hammer
    • mason's chisel and maul
      mason's chisel and maul
    • square spade
      spade
    • pointed shovel
      shovel
    • bubble level
      line level
    • tamper
      hand tamper or compactor (rents for about $85 a day)
    • metal garden rake
      garden rake
    • mallet
      rubber mallet
    • four-foot level
      4-foot level
    • push broom
      push broom
    • hand trowel
      garden spade

    Shopping List

    1. 1½-inch Broken Bluestone Sold in stone yards by the ton; 1½ tons cover about 100 square feet with wide joints. Choose an assortment of small and large stones of varying shapes. If possible, lay the stones out at the yard so that you know you have what you need.

    2. Stakes and Mason's line to lay out the pitch of the patio and keep the stones level.3. Paver Base A mixture of ¾-inch gravel and stone dust. One yard covers 108 square feet 3 inches deep.

    4. Leveling Sand One yard covers 324 square feet 1 inch deep.

    5. Moss Sold by the square foot. Buy enough to cover one-fifth of the area of the patio.