Step 6: Finish the Doors

finish the doors
Photo: Tria Giovan
«»
Cut two pieces of plywood 1 inch smaller than the doors. Using the drill/driver and 1-inch screws, fasten the pieces to the back of the doors to cover the cut-metal edges.
Ask TOH users about Outdoor Kitchens

Contribute to This Story Below

    Tools List

    • circular saw
      Circular saw
    • drill
      Cordless drill with bit set
    • metal cutting snips
      Tin snips
    • adjustable pliers
      Pliers
    • bar clamps
      Clamps
    • hammer with nailset
      Hammer with nailset

    Shopping List

    1. two 14-inch-square wood planter boxes

    2. two cabinet door catches

    3. 4-by-4-foot sheet of ½-inch plywood

    4. 2-by-4-foot sheet of 0.09-mil galvanized sheet metal

    5. hooks6. two door pulls

    7. four 4-inch strap hinges

    8. four 3-inch casters with locks

    9. 2½-inch deck screws

    10. 1-inch deck screws

    11. 4d galvanized nails