Step 3: Wrap the Plywood in Metal

wrap the plywood in metal
Photo: Tria Giovan
«»
Place the plywood top on the metal, aligning it with the marker outline. Clamp the wood and metal to your worktable together, letting one side hang over the edge of the table.

Bend the metal up against the side of the plywood at the marker line.
Ask TOH users about Outdoor Kitchens

Contribute to This Story Below

    Tools List

    • circular saw
      Circular saw
    • drill
      Cordless drill with bit set
    • metal cutting snips
      Tin snips
    • adjustable pliers
      Pliers
    • bar clamps
      Clamps
    • hammer with nailset
      Hammer with nailset

    Shopping List

    1. two 14-inch-square wood planter boxes

    2. two cabinet door catches

    3. 4-by-4-foot sheet of ½-inch plywood

    4. 2-by-4-foot sheet of 0.09-mil galvanized sheet metal

    5. hooks6. two door pulls

    7. four 4-inch strap hinges

    8. four 3-inch casters with locks

    9. 2½-inch deck screws

    10. 1-inch deck screws

    11. 4d galvanized nails