Step 3: Finish attaching brackets

finish attaching brackets
Photo: David Carmack
«»
Drill pilot holes through the back of each end rosette and into the side brackets. Screw 1½-inch screws through the two pilot holes.
Next

Related Content

Ask TOH users about Storage
Discuss

Contribute to This Story Below

Add Comment

    More in Living Spaces

    Tools List

    Close
    • miter saw
      Miter Saw
    • hammer
      Hammer
    • drill
      Drill Driver
    • wood glue
      Wood Glue
    • wood putty
      Wood Putty
    • sand paper
      150-grit Sandpaper
    • paintbrush
      Polyester Nylon Paintbrush

    Shopping List

    Close
    1. 3-inch Rosettes

    2. 7-inch Shelf Brackets

    3. 1x3 Pine

    4. Small Crown Molding5. 1½-inch Multi-Purpose Screws

    6. 4 Penny Finish Nails

    7. Primer and Paint