Step 2: Attach first bracket to rosette assembly

attach first bracket to rosette assembly
Photo: David Carmack
«»
Align a shelf bracket with the end of the rosette assembly. Using a drill/driver, drill pilot holes at an angle through the back of the rosette and through the 1x3 base into the bracket. Screw on the bracket with 1½-inch screws through the two pilot holes.
Ask TOH users about Storage

Contribute to This Story Below

    Tools List

    • miter saw
      Miter Saw
    • hammer
      Hammer
    • drill
      Drill Driver
    • wood glue
      Wood Glue
    • wood putty
      Wood Putty
    • sand paper
      150-grit Sandpaper
    • paintbrush
      Polyester Nylon Paintbrush

    Shopping List

    1. 3-inch Rosettes

    2. 7-inch Shelf Brackets

    3. 1x3 Pine

    4. Small Crown Molding5. 1½-inch Multi-Purpose Screws

    6. 4 Penny Finish Nails

    7. Primer and Paint