Step 3: Cut along the line

Cut along the line using a jigsaw.
photo: Kristine Larsen
«»
Cut along the line using a jigsaw. To steady the tool, clamp a wood scrap to the tread as a guide.
Ask TOH users about Salvage

Contribute to This Story Below

    Tools List

    • nail puller
      nail puller
    • paint scraper
      scraper
    • speed square
      speed square
    • bar clamps
      bar clamp
    • jigsaw
      jigsaw
    • drill
      drill/driver, with countersink combo bit
    • torpedo level
      torpedo level
    • hammer
      hammer

    Shopping List

    1. Salvaged spindles

    2. Salvaged stair tread

    3. Rough-sawn pine board, or salvaged riser

    4. 2x4, for blocking

    5. 3 ½-inch deck screws

    6. 1 5/8 screws

    7. 8d finishing nails