Step 3: Cut plumbing holes

cut plumbing holes
Illustration: Gregory Nemec
«»
Scrape white chalk onto the cut ends of your bathroom's existing plumbing, then push the dresser against the pipes to mark their locations on the vanity back. Cut holes with a drill/driver fitted with the appropriate hole saws.
Ask TOH users about Bathroom Sinks

Contribute to This Story Below

    Tools List

    • drill
      Drill/Driver
      fitted with a hole saw
    • caulk gun
      Caulk Gun
    • pipe wrench
      Pipe Wrench

    Shopping List

    1. Drawer tip-out tray kit (hinges and screws included)

    2. White chalk to transfer the plumbing's location onto the wall

    3. Silicone caulk to attach the sink top to the dresser

    4. Additional PVC or copper piping