Photo: Ask This Old House TV
«»
Cut islands out of a green welcome mat or artificial turf to form the rough. Place these patches around your course to create obstacles for your players.
Step 11: Make the Rough
Introduction
Overview
Step 1
Lay out and cut the baluster supports
Step 2
Glue the baluster supports in place
Step 3
Cut the hole
Step 4
Apply the adhesive
Step 5
Stick the felt to the panel
Step 6
Cut the felt corners
Step 7
Wrap the sides
Step 8
Wrap the hole
Step 9
Finish the hole
Step 10
Line the course
Step 11
Make the Rough
Step 12
Make a loop-de-loop
Step 13
Make a flexible ramp
More in Yard & Garden
Tools List
-
Miter box with backsaw
-
Drill/driver fitted with 4-inch and 2¾-inch hole saws
-
Spring clamps
-
Plastic drop cloth
-
Utility knife
-
Framing square
-
Hacksaw
Shopping List
One 2x4-foot sheet of ¾-inch medium-density fiberboard
(MDF)
Five deck balusters
Wood glue
Cyanoacrylate glue
(aka Krazy Glue)
1½ yards of 72—inch—wide green felt
Spray adhesive
3-inch PVC pipe fitting
(coupling, cap, or adapter)Five composite wood balusters
(such as Trex)
Outdoor welcome mat
or artificial turf
Two 5-gallon buckets
Duct tape
Three 2-inch PVC elbows
Flexible plastic sign
Note: Materials list is for a single panel. The course shown is made up of four panels.
(MDF)
Five deck balusters
Wood glue
Cyanoacrylate glue
(aka Krazy Glue)
1½ yards of 72—inch—wide green felt
Spray adhesive
3-inch PVC pipe fitting
(coupling, cap, or adapter)Five composite wood balusters
(such as Trex)
Outdoor welcome mat
or artificial turf
Two 5-gallon buckets
Duct tape
Three 2-inch PVC elbows
Flexible plastic sign
Note: Materials list is for a single panel. The course shown is made up of four panels.
Contribute to This Story Below