Step 5: Stick the felt to the panel

stick the felt to the panel
Photo: Ask This Old House TV
«»
Check the felt to make sure it’s perfectly smooth. Turn the MDF over and hold it over the felt, being careful not to let the two touch. Place the panel on the center of the felt, and press it down.

Spray more adhesive around the hole and on the balusters on the bottom of the panel. Let it dry.
Next

Related Content

Ask TOH users about Yard & Garden
Discuss

Contribute to This Story Below

Add Comment

    More in Yard & Garden

    Tools List

    Close
    • miterbox with saw
      Miter box with backsaw
    • drill
      Drill/driver fitted with 4-inch and 2¾-inch hole saws
    • hand clamps
      Spring clamps
    • drop cloth
      Plastic drop cloth
    • utility knife
      Utility knife
    • framing square
      Framing square
    • hacksaw
      Hacksaw

    Shopping List

    Close
    One 2x4-foot sheet of ¾-inch medium-density fiberboard
    (MDF)

    Five deck balusters

    Wood glue

    Cyanoacrylate glue
    (aka Krazy Glue)

    1½ yards of 72—inch—wide green felt

    Spray adhesive

    3-inch PVC pipe fitting
    (coupling, cap, or adapter)Five composite wood balusters
    (such as Trex)

    Outdoor welcome mat
    or artificial turf

    Two 5-gallon buckets

    Duct tape

    Three 2-inch PVC elbows

    Flexible plastic sign

    Note: Materials list is for a single panel. The course shown is made up of four panels.