Step 6: Attach the Feet

Attach the Feet
Photo: Gemma Comas
«»
Using a drill/driver, make holes for the feet in the bottom corners of the headboard and footboard. Select the proper-size drill bit by holding it end-to-end with the bolts attached to the feet—it is best to choose a bit that is slightly smaller than the bolt. Screw the feet into the holes. Paint all the pieces or stain and polyurethane them.
Ask TOH users about Bedrooms

Contribute to This Story Below

    Tools List

    • drill
      Drill/Driver
    • circular saw
      Circular Saw
    • miter saw
      Miter Saw
    • hammer
      Hammer
    • hand plane
      Hand Plane

    Shopping List

    1. 4d finish nails

    2. 1x6 and 1x3 trim boards

    3. Crown molding

    4. Three sets of 24x80 three-paneled bifold doors (for a full or queen bed)

    5. 8-inch steel strapping (and ¾-inch bolts)

    6. 1½-inch screws (and fender washers)

    7. Four turned wood feet

    8. Wood glue