Step 4: Attach the Top to the Headboard

Lay the five connected headboard panels faceup on a worktable. Dot the top rail with wood glue wherever the doors meet. Position the crown top 1 inch below the top of the headboard. Nail it every 6 to 8 inches with 4d finishing nails.
Ask TOH users about Bedrooms

Contribute to This Story Below

    Tools List

    • drill
    • circular saw
      Circular Saw
    • miter saw
      Miter Saw
    • hammer
    • hand plane
      Hand Plane

    Shopping List

    1. 4d finish nails

    2. 1x6 and 1x3 trim boards

    3. Crown molding

    4. Three sets of 24x80 three-paneled bifold doors (for a full or queen bed)

    5. 8-inch steel strapping (and ¾-inch bolts)

    6. 1½-inch screws (and fender washers)

    7. Four turned wood feet

    8. Wood glue