Step 8: Center the Knob on the Shutter

inserting the knob post after predrilling a hole centered on the shutter
Photo: Kristine Larson
«»
Center the knob on the shutter and predrill a hole. Insert the knob post from the back, and twist on the pull. Now you're ready to swing open your new media cabinet door, flip on the tube, and veg out.
Ask TOH users about Salvage

Contribute to This Story Below

    Tools List

    • drill
      Drill/driver
    • chisel
      Chisel
    • utility knife
      Utility knife
    • Phillips screwdriver
      Screwdriver
    • flathead screwdriver
      Rasp
    • rasp
      Paintbrush

    Shopping List

    1. 2 vintage interior shutters

    2. 1 pair of wrap-around shutter hinges

    3. 1 pair of no-mortise hinges

    4. Cabinet door pull

    5. Paint and primer

    6. Epoxy filler