Step 6: Create the Bifold

Stand both shutters back to back, their sides facing up. At 6 inches from their tops and bottoms, place a no-mortise hinge (about $3.75 a pair; Rockler Wodworking and Hardware) so the barrel is between the two shutters. Predrill holes, and drive in the hinge screws.
Ask TOH users about Salvage

Contribute to This Story Below

    Tools List

    • drill
    • chisel
    • utility knife
      Utility knife
    • Phillips screwdriver
    • flathead screwdriver
    • rasp

    Shopping List

    1. 2 vintage interior shutters

    2. 1 pair of wrap-around shutter hinges

    3. 1 pair of no-mortise hinges

    4. Cabinet door pull

    5. Paint and primer

    6. Epoxy filler