Step 2: Make the top

Make the top build bird feeder
Photo: Wendell T. Webber
«»
Glue two 3½-inch blocks together, and secure them with 4d nails. Then glue and nail one of the circles on top of the blocks.

Mix the epoxy, and spread it on one side of the square. Set the square into the copper post cap. Let it set for 20 minutes.
Ask TOH users about Outdoor Structures

Contribute to This Story Below

    More in Landscaping

    Tools List

    • 30-foot tape measure
      Tape measure
    • combination square
      Combination square or framing square
    • pencil compass
      Compass
    • safety glasses
      Safety glasses
    • bar clamps
      Bar clamps
    • jigsaw
      Jigsaw
    • random orbit sander
      Random-orbit sander or sanding block with 120-grit sandpaper
    • hammer
      Hammer
    • drill
      Drill/driver fitted with ¼-inch bit and ½-inch spade bit
    • scissors
      Scissors
    • wire cable snips
      Wire cutters
    • Phillips screwdriver
      Screwdriver

    Shopping List

    1. 2 feet of 1x6 cedar

    2. 2 feet of ¼-inch dowel

    3. 120-grit sandpaper

    4. Wood glue

    5. 4d finish nails

    6. -inch rubber grommet

    7. Epoxy8. Copper-topped post cap for a 4x4

    9. 1-liter soda bottle

    10. Three feet of 5⁄32-inch vinyl-covered wire

    11. -inch blued tacks

    12. Eye screw