Step 6: Bed the Glass

Bed the Glass to Save That Sash
Photo: David Carmack
«»
Lay the sash exterior side up. Roll glazing compound into a long rope, between your hands and press it into the groove, or rabbet, around the pane opening. Gently press the pane evenly into the compound until it's bedded about 1/16 inch from the bottom of the rabbet.
Ask TOH users about Windows

Contribute to This Story Below

    Tools List

    • flat prybar
      Pry Bar
    • flathead screwdriver
      Flat-Head Screwdriver
    • electric heat gun
      Heat Gun (with nozzle shield)
    • utility knife
      Utility Knife
    • putty knife
      Putty Knife
    • dremel
      Dremel (with carving bit)
    • Natural Bristle Brush
      Natural Bristle Brush (for oil-based primer)
    • synthetic brush
      Synthetic Filament Brush (for top coat)

    Shopping List

    1. Flexible Epoxy Wood Repair System

    2. Plexiglas

    3. Glazing Compound

    4. Glazier's Points

    5. Oil-based Primer

    6. Acrylic Latex Paint

    7. Weatherstripping, if needed

    8. Silicon Spray

    9. Sash Cord or Chains