Step 10: Conceal platform

Concealing the platform of the platform of the entertainment center with baseboard molding
Photos: Donna Moser/Alderman Studio
«»
Next, conceal the exposed platform around the bottom of the cabinets with baseboard molding, available prefinished from the cabinet manufacturer to match the cabinets.
Next

Related Content

Ask TOH users about Media Rooms
Discuss

Contribute to This Story Below

Add Comment

    More in Living Spaces

    Tools List

    Close
    • drill
      Drill/driver
    • circular saw
      Circular saw or hand saw
    • hammer
      Hammer or pneumatic finish nailer
    • 16-foot tape measure
      Tape measure
    • two-foot level
      Level
    • adjustable clamp
      Clamps, for holding together cabinets
    • flat prybar
      Thin pry bar, used to remove existing molding from walls
    • studfinder
      Stud finder, for locating wall studs
    • Countersink bit
      Countersink drill bit, used to bore screw-pilot and countersink holes in face frames

    Shopping List

    Close
    1. Stock cabinets with matching trim and plywood skins

    2. Contact cement, used to adhere prefinished plywood skin to assembled cabinets

    3. Paintbrush and paint roller, used to apply contact cement

    4. 1 ½-inch finishing nails, for attaching trim to cabinets

    5. 2 x 4s, used to build platform

    6. 2 ½- and 3-inch drywall screws, for joining together cabinets and assembling platform

    7. Wood shims, used to level platform and plumb cabinets

    8. 3/4 x 1-inch wood strips, to provide nailing support for crown molding