Step 4: Sand the Primer

Sand the primer kitchen cabinet
Photograph: Kolin Smith
«»
Allow the primer to dry for several hours. Using a random-orbit sander and 220-grit sandpaper, smooth away any brushstrokes in the primer on the panels and other flat surfaces.
Next

Related Content

Ask TOH users about Kitchen Cabinets
Discuss

Contribute to This Story Below

Add Comment

    More in Kitchen

    Tools List

    Close
    • putty knife
      Putty Knife to fill holes and dings

    • drill
      Drill/Driver

    • paintbrush
      2½-Inch Nylon-Polyester Paintbrush with chisel-tip bristles (have two, for switching from primer to paint)

    • paint sprayer
      Airless Paint Sprayer (optional; rents for $75 a day)

    • Phillips screwdriver
      Screwdriver

    Shopping List

    Close
    1. Paint Oil-based or 100 percent acrylic latex paint specially formulated for cabinetry applications or high-traffic areas. You will need about a gallon per coat on a bank of four upper and lower cabinets.

    2. Primer to fill the wood grain and to create a smooth surface for the final coat. Look for ones labeled "high build" and "sandable." If your cabinets are laminates, not wood, get a "sealer" primer for smooth surfaces that can't be sanded.

    3. Rosin Paper to cover and protect countertops

    4. 0.5 mm Plastic to cover the backsplash and surrounding areas 5. Painter's Tape

    6. Scrubbing Sponge

    7. TSP Substitute or Degreaser to remove built-up residue

    8. Wood Putty to fill old hardware holes

    9. 100-Grit and 220-Grit Sandpaper

    10. Tack Cloths to wipe the sanding dust off the cabinets between coats

    11. Fine-Grit Sanding Sponge to smooth the primer on the trim

    12. Cup Hooks to hang the doors while they dry