Step 6: Check the Fit

check to see if the newly cut tiles fit the tabletop
Photo: Kenneth Chen
«»
Replace the tiles in their grid to check the fit. If there's still a slight overlap, take off the excess with the grindstone.
Ask TOH users about Salvage

Contribute to This Story Below

    Tools List

    • wet saw
      Wet tile saw
    • grout sponge
      Tile grout sponge
    • plastic spacers for tile
      Plastic spreader
    • margin trowel
      Small trowel or old batter spatula
    • rubbing stone
      Grindstone
    • latex gloves
      Latex gloves
    • safety glasses
      Safety glasses

    Shopping List

    1. Salvaged tiles: $3 to $65, depending on size, detail, and rarity; Recycling the Past

    2. Vintage metal table base: find these on eBay and at flea markets for about $15

    3. Tile spacers: use 1/8-inch thick Masonite board (sold at your local lumber yard) or purchase 1/8- and 1/4-inch tile spacers (at hardware stores) 4. Weldbond polyvinyl glue, $3.50 at Ace Hardware

    5. Henry 314 Multipurpose Ceramic Tile Adhesive (small container)