Step 6: Paint the design

decorate the tree swing seat
Photo: Wendell T. Webber
«»
Using exterior latex paint, brush the background color onto the seat. Coat the entire surface—top, bottom, and edges—to seal the wood. Allow the paint to dry.

Draw the flower or other pattern in pencil on the background color. Use artist’s brushes to fill in the design with more exterior paint.
Ask TOH users about Outdoor Structures

Contribute to This Story Below

    More in Landscaping

    Tools List

    • 16-foot tape measure
      Tape Measure
    • combination square
      Combination square
    • bar clamps
      Bar clamps
    • jigsaw
      Jigsaw
    • drill
      Drill/driver fitted with 3/16-inch drill bit, 1-inch spade bit, and long -inch spade bit
    • pencil compass
      Compass
    • random orbit sander
      Random-orbit sander
    • paintbrush
      2-inch paintbrush
    • artist paintbrush
      Small artist's paintbrush
    • Phillips screwdriver
      Screwdriver
    • adjustable wrench
      Wrench

    Shopping List

    1. 1x8 oak, maple, or other hardwood board, 4 feet long

    2. ¾-inch polypropylene rope

    3. 120-grit sandpaper

    4. Exterior-grade wood glue

    5. 1¼-inch deck screws6. Exterior latex paint

    7. Carabiner or spring clip

    8. -inch-thick, 10-inch-long stainless-steel or galvanized eyebolt with washer and two nuts

    9. ¾-inch rope thimble