Step 8: Install inside header

cut a 2x12 header to fit into the space above the skylight
Photo: John Nasta
«»
From inside, cut a 2x12 header to fit into the space above the skylight. Be sure that it’s parallel with the floor.
Next

Related Content

Ask TOH users about Windows
Discuss

Contribute to This Story Below

Add Comment

    More in House Exterior

    Tools List

    Close
    • 16-foot tape measure
      Tape measure
    • hammer
      Hammer
    • drill
      Drill-driver
    • drywall saw
      Drywall saw
    • reciprocating saw
      Reciprocating saw
    • drywall knife
      Drywall knife

    Shopping List

    Close
    1. Venting skylight with flashing kit

    2. 2x4s
    used to reframe sill

    3. 2x12
    used to form a header over the skylight

    4. 15-pound roofing felt

    5. Drywall
    used to cover the interior surfaces around the skylight

    6. Corner bead
    used to protect the drywall corners

    7. Joint compound

    8. Drywall tape

    9. 1 1/2-inch drywall nails
    used to attach corner bead

    10. 1/2-inch plywood
    used to create viewing shelf

    11. Primer and paint