«»
Remove the columns and cut the elliptical shapes from the drywall pieces using a drywall saw. Follow the pencil lines as closely as possible, but don't worry if your cuts are a little crooked; the arch will hide them.
Step 6: Cut out the arch
Introduction
Step 1
Remove casing
Step 2
Remove jambs and molding
Step 3
Install nailing blocks
Step 4
Install drywall extender for arch
Step 5
Stencil in the arch shape
Step 6
Cut out the arch
Step 7
Tape and compound the seams
Step 8
Secure the prefab arch
Step 9
Secure prefab columns and complete installation
«»
More in Framing & Insulation
Tools List
-
Tape measure
-
Hammer
-
Utility knife, for scoring around casings
-
Pry bar, used to remove casings
-
Drill/driver, for driving drywall screws
-
Handsaw, for cutting 1x4 blocking
-
Drywall saw, for cutting drywall
-
Drywall knife, for applying joint compound
Shopping List
1. ARCHWAY KIT
2. ½-INCH FINISHING NAILS
3. ½-INCH DRYWALL SCREWS
4. DRYWALL
5. 120-GRIT SANDPAPER
6. PRIME AND PAINT
7. DROP CLOTH
2. ½-INCH FINISHING NAILS
3. ½-INCH DRYWALL SCREWS
4. DRYWALL
5. 120-GRIT SANDPAPER
6. PRIME AND PAINT
7. DROP CLOTH
Contribute to This Story Below