Step 4: Install drywall extender for arch

Install drywall arch extenders «»
Cut two pieces of drywall 15-inches-high and as wide as the opening. Be sure to use drywall that's the same thickness as the existing drywall (typically ½-inch). Raise the drywall piece into place and secure it to the 1x4 blocking with 1 ½-inch drywall screws. Hang the second drywall piece on the opposite side of the opening.
Next

Related Content

Ask TOH users about Framing
Discuss

Contribute to This Story Below

Add Comment

    More in Framing & Insulation

    Tools List

    Close
    • 16-foot tape measure
      Tape measure
    • hammer
      Hammer
    • utility knife
      Utility knife, for scoring around casings
    • flat prybar
      Pry bar, used to remove casings
    • drill
      Drill/driver, for driving drywall screws
    • hand saw
      Handsaw, for cutting 1x4 blocking
    • drywall saw
      Drywall saw, for cutting drywall
    • drywall knife
      Drywall knife, for applying joint compound

    Shopping List

    Close
    1. ARCHWAY KIT

    2. ½-INCH FINISHING NAILS

    3. ½-INCH DRYWALL SCREWS

    4. DRYWALL

    5. 120-GRIT SANDPAPER

    6. PRIME AND PAINT

    7. DROP CLOTH