Step 9: Insert dresser

put the dresser into the wall-opening
Photo: Geoffrey Gross
«»
Set the chest onto the sill and slide it into the hole in the wall. Push it straight back until it’s flush with the finished wall surface.
Ask TOH users about Storage

Contribute to This Story Below

    Tools List

    • drill
      Drill/driver
    • hammer
      Hammer
    • hand saw
      Handsaw
    • 100-foot tape measure
      Tape measure
    • two-foot level
      Level
    • drywall saw
      Drywall saw
    • circular saw
      Circular saw

    Shopping List

    1) Chest of drawers

    2) 2- and 3-inch drywall screws

    3) Paint, stain or varnish
    used to seal bare wood

    4) Paintbrush

    5) Drop cloth

    6) 1/8-inch hardboard
    used to cover opening cut into rear of chest

    7) 3/4-inch wire nails
    used to secure hardboard

    8) Doorstop molding
    used to trim around installed chest

    9) 1 1/2-inch finishing nails
    for attaching doorstop molding