Step 4: Install cabinets to toekick

building a window seat
Photo: Thomas-Rouchard Studio
«»
Next, install a 12-inch-deep x 24½-inch-tall x 30-inch-wide cabinet to each end of the toekick. Clamp and screw these end cabinets to the window seat cabinets. Again, be sure the face frames are perfectly flush before driving in the screws.
Next

Related Content

Ask TOH users about Storage
Discuss

Contribute to This Story Below

Add Comment

    More in Living Spaces

    Tools List

    Close
    • drill
      Drill/driver
    • pneumatic finish nailer
      Finish nailer
    • 16-foot tape measure
      Tape measure
    • two-foot level
      Level
    • bar clamps
      Clamps
    • flat prybar
      Thin prybar
    • studfinder
      Stud finder
    • Countersink bit
      Counter-sink drillbit
    • caulk gun
      Caulking gun

    Shopping List

    Close
    1. STOCK KITCHEN CABINETS
    with matching trim and plywood skins

    2. UPHOLSTERED SEAT CUSHION

    3. CONTACT CEMENT
    used to adhere prefinished plywood skin to assembled cabinets

    4. PAINTBRUSH AND PAINT ROLLER
    used to apply contact cement

    5. 1½-INCH FINISHING NAILS
    for attaching trim pieces to cabinets

    6. 2x2 BLOCKS
    used to raise overall cabinet height to ceiling

    7. 2½- AND 3-INCH DRYWALL SCREWS
    for joining together cabinets and assembling toekick

    8. WOOD SHIMS
    used to level toekick

    9. LATEX CAULK