Step 11: Install storm door

Set the door into the opening and drive screws through the mounting flange and into the existing wood brick mold
Photo: Smith/ Baer
«»
Set the door into the opening and drive screws through the mounting flange and into the existing wood brick mold. Install the latch-side and head-mounting flanges the same way. Finish by installing the two door closers and the lockset.
Ask TOH users about Curb Appeal

Contribute to This Story Below

    Tools List

    • hammer
      Hammer
    • drill
      Drill/driver
    • circular saw
      Circle saw
    • hacksaw
      Hacksaw

    Shopping List

    1. Replacement entry door
    2. Urethane-foam exterior trim
    includes crosshead pediment and fluted columns

    3. Aluminum storm door

    4. Urethane adhesive
    used to adhere exterior trim

    5. Silicone caulk
    for sealing underneath new threshold

    5. 1 5/8-inch roofing nails
    used to secure new doorframe

    6. Straightedge
    used as a saw guide when trimming the siding

    7. 3-inch (10d) galvanized finishing nails
    for attaching urethane trim

    8. Exterior-grade putty
    used to fill nail holes in trim