Step 2: Sand the pieces

sanding with a random orbit sander
Photo: Wendell T. Webber
«»
Clamp the pieces to the worktable and sand them with 120-grit sandpaper on a random-orbit sander until the wood is free of splinters. Make sure to hold on to the sander tightly because is can spin away from you.
Ask TOH users about Furniture

Contribute to This Story Below

    Tools List

    • 30-foot tape measure
      Tape measure
    • combination square
      Combination square
    • straightedge guide
      Straightedge
    • adjustable clamp
      Adjustable clamps
    • safety glasses
      Safety glasses
    • jigsaw
      Jigsaw
    • random orbit sander
      Random-orbit sander
    • bar clamps
      36-inch bar clamp
    • hammer with nailset
      Hammer and nailset
    • drill
      Drill/driver fitted with -inch bit
    • putty knife
      Putty knife
    • paint brush and roller
      Small paint rollers and brush
    • Phillips screwdriver
      Screwdriver

    Shopping List

    1. 4-by-4-foot piece of ½-inch birch plywood

    2. 120-grit sandpaper

    3. Stainable wood glue

    4. Rag

    5. 4d finish nails

    6. Stainable wood putty
    7. Four 2-inch casters

    8. Satin-finish latex paint
    in red, white, and silver

    9. Painter’s tape

    10. 30-inch continuous hinge

    11. Two toy box spring lid supports
    (one left and one right)