Photo: Wendell T. Webber
«»
Using utility scissors, trim off the excess netting around the front and bottom of the goal.
Step 8: Cut off the excess netting
Introduction
Overview
Step 1
Lay out the pieces
Step 2
Cut the pipe
Step 3
Dry-fit the frame
Step 4
Keep track of the connections
Step 5
Glue the frame together
Step 6
Make the net
Step 7
Attach the net
Step 8
Cut off the excess netting
Step 9
Hold down the goal
More in Interior
Tools List
-
Tape measure
-
Hacksaw
-
Utility scissors
-
Permanent marker
Shopping List
1. Four 10-foot lengths of 1¼ PVC tubing
2. Six 1¼-inch PVC elbows
3. Four 1¼-inch PVC tees 4. 80-grit sandpaper
5. PVC pipe cement
(preferably a low-VOC formula that's labeled all-weather) 6. Deer netting
7. Five dozen zip ties
8. Small sand bags
(optional: to hold down the goal when you play)
2. Six 1¼-inch PVC elbows
3. Four 1¼-inch PVC tees 4. 80-grit sandpaper
5. PVC pipe cement
(preferably a low-VOC formula that's labeled all-weather) 6. Deer netting
7. Five dozen zip ties
8. Small sand bags
(optional: to hold down the goal when you play)
Contribute to This Story Below