Step 5: Install the side tracks

5. Cut the aluminum side tracks to length with a hacksaw, then slip them into place under each end of the storage cassette mounted overhead. «»
Take down the cassette and measure from the sill up to the pencil lines. Subtract 1/8 in. from those dimensions and cut the two aluminum side tracks to match. Reinstall the cassette. Slip the side tracks into place under the ends of the cassette.
Ask TOH users about Doors

Contribute to This Story Below

    Tools List

    • 30-foot tape measure
      Tape measure
    • drill
      Drill/driver
    • hacksaw
      Hacksaw

    Shopping List

    1) 1 1/2-INCH DRYWALL SCREWS
    for attaching the side tracks

    2) 1/2-INCH-DIAMETER PLASTIC PIPE
    short section used as a screw guide for attaching side tracks