Step 4: Mount the storage cassette

4. Snap the storage cassette into the mounting clips, then mark its position on the side jambs with a sharp pencil. «»
Carefully raise the storage cassette to the top of the doorway and snap it into the two mounting clips. Mark a horizontal pencil line along each side jamb directly underneath the cassette.
Ask TOH users about Doors

Contribute to This Story Below

    Tools List

    • 30-foot tape measure
      Tape measure
    • drill
      Drill/driver
    • hacksaw
      Hacksaw

    Shopping List

    1) 1 1/2-INCH DRYWALL SCREWS
    for attaching the side tracks

    2) 1/2-INCH-DIAMETER PLASTIC PIPE
    short section used as a screw guide for attaching side tracks