«»
After cutting the cassette down to size, replace the plastic end caps, which simply snap back onto the just-cut cassette. Also replace the screen handle.
Step 2: Re-assemble the parts
Introduction
Overview
Step 1
Trim to fit
Step 2
Re-assemble the parts
Step 3
Attach the mounting clips
Step 4
Mount the storage cassette
Step 5
Install the side tracks
Step 6
Secure each side track
Step 7
Test the screen door
«»
More in Interior
Tools List
-
Tape measure
-
Drill/driver
-
Hacksaw
Shopping List
1) 1 1/2-INCH DRYWALL SCREWS
for attaching the side tracks
2) 1/2-INCH-DIAMETER PLASTIC PIPE
short section used as a screw guide for attaching side tracks
for attaching the side tracks
2) 1/2-INCH-DIAMETER PLASTIC PIPE
short section used as a screw guide for attaching side tracks
Contribute to This Story Below