Step 5: Texture the surface

repairing concrete «»
Carefully draw a medium-bristle push broom across the wet areas to create a textured, slip-resistant surface. If you notice any bare spots, add more concrete dressing with a trowel, and brush the area again.
Ask TOH users about Driveway & Walkway

Contribute to This Story Below

    Tools List

    • drill
      Electric drill with mixing paddle
    • caulk gun
      Caulking gun
    • putty knife
      Putty knife
    • flat finishing trowel
      Trowel
    • push broom
      Push broom
    • garden sprayer
      Pump sprayer

    Shopping List

    1. CONCRETE RESURFACER
    one 20-pound bag will cover about 50 to 60 square feet

    2. 5-GALLON BUCKET
    for mixing concrete resurfacer

    3. TSP (trisodium phosphate)
    used to clean concrete prior to resurfacing

    4. DUCT TAPE
    used to cover expansion joints prior to resurfacing

    5. CONCRETE-REPAIR CAULK
    used to fill cracks up to ½-inch wide

    6. MASONRY MORTAR MIX
    for patching cracks wider than ½-inch

    7. MASONRY SEALER
    for treating the concrete after resurfacing