Step 3: Mix concrete

repairing concrete «»
Use a 650-rpm, ½-inch drill motor and a heavy-duty mixing paddle to mix the concrete dressing to a smooth consistency. Pour 2½ quarts of water into a clean 5-gallon bucket. Add a 20-pound bag of the dressing and mix continuously for two minutes. Lift out the paddle and stand it in a bucket of clean water.
Ask TOH users about Driveway & Walkway

Contribute to This Story Below

    Tools List

    • drill
      Electric drill with mixing paddle
    • caulk gun
      Caulking gun
    • putty knife
      Putty knife
    • flat finishing trowel
      Trowel
    • push broom
      Push broom
    • garden sprayer
      Pump sprayer

    Shopping List

    1. CONCRETE RESURFACER
    one 20-pound bag will cover about 50 to 60 square feet

    2. 5-GALLON BUCKET
    for mixing concrete resurfacer

    3. TSP (trisodium phosphate)
    used to clean concrete prior to resurfacing

    4. DUCT TAPE
    used to cover expansion joints prior to resurfacing

    5. CONCRETE-REPAIR CAULK
    used to fill cracks up to ½-inch wide

    6. MASONRY MORTAR MIX
    for patching cracks wider than ½-inch

    7. MASONRY SEALER
    for treating the concrete after resurfacing