Step 3: Dig out the center of the box

building a sandbox «»
Using a spade, dig down 6 inches within the outline of the sandbox. Then add a 4-inch-wide and 1-inch-deep layer of sand inside the perimeter of the hole.

Tip: If the area you've chosen for your sandbox is not level, see instructions here for digging a flat-bottomed hole.
Next

Related Content

Ask TOH users about Outdoor Structures
Discuss

Contribute to This Story Below

Add Comment

    More in Landscaping

    Tools List

    Close
    • square shovel
      Spade and Shovel
    • circular saw
      Circular saw
    • speed square
      Speed square
    • framing square
      Framing square
    • four-foot level
      4-foot level
    • mallet
      Rubber mallet or sledge
    • hammer
      Hammer
    • drill
      Heavy duty drill/driver or impact driver fitted with 1/4-inch nut driver bit

    Shopping List

    Close
    1. 4x4 CEDAR TIMBERS
    to make up the sides of the sandbox

    2. SCRAP 2x4
    to hold the timbers square while you fasten them down

    3. 3-INCH DECKING SCREWS

    4. 6-INCH SELF-TAPPING TIMBER SCREWS

    5. LANDSCAPE FABRIC
    to line the box and keep weeds from growing up through the sand

    6. PLAY SAND
    aka natural sand

    7. TARP
    large enough to cover the completed sandbox

    8. VELCRO TAPE
    to hold the tarp down