Step 6: Set up the fort walls

family building a fort
Photo: Wendell T. Webber
«»
Before you bring the sides of the fort outside, brace the hatch with scrap wood screwed across the door edge; this will keep it from swinging open and hurting someone in transit.

Carry the four fencing sections to the fort site. Lay them face down in the area where they will stand.
Ask TOH users about Outdoor Structures

Contribute to This Story Below

    More in Landscaping

    Tools List

    • 100-foot tape measure
      Tape measure
    • jigsaw
      Jigsaw
    • speed square
      Combination square
    • hand saw
      Handsaw
    • drill
      Drill/driver with -inch and 1-inch spade bits
    • safety glasses
      Safety glasses
    • hacksaw
      Hacksaw

    Shopping List

    1. 4-foot-high stockade fencing
    (four sections at least 5 feet long)

    2. One 8-foot 2x4

    3. One 8-foot 2x3

    4. 2-foot-square section of ½-inch pressure-treated plywood

    5. Eight L-brackets
    (4 inches by 1 inch)

    6. 1-inch deck screws 7. 3½-inch deck screws

    8. 5 feet of ½-inch PVC pipe

    9. PVC pipe cap

    10. Two 3½-inch door hinges

    11. Flag

    12. Wire