Step 9: Prepare the back panel

Prepare the back panel
Photo: Wendell T. Webber
«»
Cut four small tabs of stick-on Velcro tape. Keep both halves of the Velcro stuck together. Peel away one side of the paper backing, and stick a tab onto each of the four corners of the back of the decorative panel. Peel away the paper backing on the other half of the Velcro tape while it’s still on the decorative panel.
Ask TOH users about Storage

Contribute to This Story Below

    Tools List

    • 30-foot tape measure
      Tape measure
    • straight edge
      Straightedge ruler
    • jigsaw
      Jigsaw, circular saw, or handsaw
    • safety glasses
      Safety glasses
    • random orbit sander
      Random-orbit sander or sanding block
    • bar clamps
      Bar clamps
    • hammer with nailset
      Hammer and nailset
    • putty knife
      Putty knife
    • paintbrush
      2-inch paintbrush
    • Artist's Brush
      Artist's brush
    • staple gun
      Staple gun
    • drill
      Drill/driver fitted with 1/16-inch drill bits
    • Phillips screwdriver
      Screwdriver

    Shopping List

    1. One quarter-sheet of ½-inch birch-veneer plywood

    2. One quarter-sheet of luaun or ¼-inch plywood

    3. 4d finish nails

    4. 1-inch box nails

    5. 120-grit sandpaper

    6. Stainable wood glue

    7. Stainable wood putty
    8. Clear acrylic finish or latex paint

    9. Acrylic artist’s paint

    10. ½ yard of fabric

    11. ¼-inch staples

    12. ¼-inch staples

    13. 2-inch screws with corresponding washers and wall anchors

    14. Velcro tape