Step 10: Add the paper

kids sliding paper roll to the easel
Photo: Wendell T. Webber
«»
Slide the dowel through the hole in one side bracket, through the paper roll, and out the other side. Then pull the paper up through the opening in the top of the easel and down over one of the boards. Secure it with the magnets you made, and you’re ready to paint and draw!
Ask TOH users about Furniture

Contribute to This Story Below

    Tools List

    • 30-foot tape measure
      Tape measure
    • combination square
      Combination square
    • bar clamps
      Bar clamps
    • hand clamps
      Spring clamps
    • jigsaw
      Jigsaw
    • drill
      Drill/driver fitted with 3/32-inch and ¼-inch, and -inch drill bits and a 1¼-inch hole saw
    • safety glasses
      Safety glasses

    Shopping List

    1. Three 8-foot oak or maple 1x3s

    2. Two 23x23-inch magnetic dry-erase boards

    3. 1-inch dowel, 3 feet long

    4. Two 4-inch strap hinges

    5. ¾-inch #10 wood screws and eight washers6. 1¼-inch #8 wood screws and two washers

    7. Two plastic trays or kitchen drawer organizers

    8. One 2-foot-wide roll of paper