Step 9: Attach the front piece

Attach the front piece
Photo: Wendell T. Webber
«»
Caulk along the face of the 1x2s on the back section. Place the front piece onto the 1x2s, with the bat shape facing the bottom, and the top edges and corners lined up. Clamp it in place. Drive 1-inch screws every 6 inches through the face and into the 1x2s to secure it.
Ask TOH users about Yard & Garden

Contribute to This Story Below

    Tools List

    • 30-foot tape measure
      Measuring tape
    • straight edge
      Straightedge
    • combination square
      Combination square
    • hand clamps
      Spring clamps
    • safety glasses
      Safety glasses
    • jigsaw
      Jigsaw
    • French curve and circle templates
    • drill
      Drill/driver fitted with ¼-inch drill bit
    • caulk gun
      Caulking gun
    • paintbrush
      Paintbrush (2-inch)
    • paintroller
      Foam roller (4-inch)
    • scissors
      Scissors
    • staple gun
      Staple gun

    Shopping List

    1. 2-by-4-foot section of ½-inch exterior-grade plywood

    2. One 6-foot 1x2

    3. ½-inch deer netting

    4. Exterior latex paint (black and another dark color)5. Low-VOC adhesive caulk

    6. 1-inch deck screws

    7. -inch staples

    8. 3½-inch deck screws