Step 9: Stand the mirror

stand the mirror
Photo: John Taylor
«»
Cover mirror edges with bead molding affixed to the inner edges of the frame with construction adhesive. Stand the mirror in a place of pride and primp away.
Next

Related Content

Ask TOH users about Salvage
Discuss

Contribute to This Story Below

Add Comment

    More in Remodels & Upgrades

    Tools List

    Close
    • drill
      Drill driver
    • caulk gun
      Caulk gun
    • hand clamps
      Clamps
    • pocket hole jig
      Pocket hole jig
    • gloves
      Gloves for handling mirror

    Shopping List

    Close
    1. Entablature top from salvaged door casing

    2. Pre-primed pilasters

    3. Bead molding

    4. Plywood backer board

    5. Mirror glass

    6. Mirror glue     7. Lumber for top and plinth blocks

    8. 1-inch finish screws

    9. 1½-inch washer head screws
    to use with pocket hole jig

    10. Paint

    11. Primer

    12. Paintbrushes

    13. Construction adhesive