Step 3: Attach the plywood back

attach the plywood backer board
Photo: John Taylor
«»
Apply construction adhesive to the back of the frame and attach the plywood backer board.
Next

Related Content

Ask TOH users about Salvage
Discuss

Contribute to This Story Below

Add Comment

    More in Remodels & Upgrades

    Tools List

    Close
    • drill
      Drill driver
    • caulk gun
      Caulk gun
    • hand clamps
      Clamps
    • pocket hole jig
      Pocket hole jig
    • gloves
      Gloves for handling mirror

    Shopping List

    Close
    1. Entablature top from salvaged door casing

    2. Pre-primed pilasters

    3. Bead molding

    4. Plywood backer board

    5. Mirror glass

    6. Mirror glue     7. Lumber for top and plinth blocks

    8. 1-inch finish screws

    9. 1½-inch washer head screws
    to use with pocket hole jig

    10. Paint

    11. Primer

    12. Paintbrushes

    13. Construction adhesive