Step 1: Align Shutters

Lay the shutters side by side on a worktable, and align their bottoms using a straightedge. (Shutter heights may vary, so be sure to use the bottoms as the baseline when taking measurements.)
Ask TOH users about Salvage

Contribute to This Story Below

    Tools List

    • 100-foot tape measure
      Measuring tape
    • drill
      Drill driver
    • Phillips screwdriver
    • pencil compass
    • combination square
      Combination Square

    Shopping List

    1. Two sets of hinges

    2. Three shutters (louvered or paneled)

    3. Hinge screws

    4. Two sets of furniture glide floor protectors