Step 1: Rip wood to size

Cut the cabinet's preprimed sides
Photo: Kristine Larsen
«»
Using a table saw, cut the cabinet's 1x preprimed pine sides to the length of the glass door. The ends and shelves should be 1 ½ inches smaller than the window's width.

You can also have the wood cut for you at the lumber yard.
Ask TOH users about Cabinets & Shelving

Contribute to This Story Below

    Tools List

    • 100-foot tape measure
      Measuring tape
    • pencil compass
      Pencil
    • framing square
      Framing square
    • combination square
      Combination Square
    • hammer
      Hammer
    • hand clamps
      Clamps
    • chisel
      Chisel
    • drill
      Cordless Drill Driver
    • Phillips screwdriver
      Screwdriver
    • paintbrush
      Paintbrush
    • table saw
      Table Saw

    Shopping List

    1. Vintage stained glass window

    2. Salvaged bin pull

    3. Pre-primed pine

    4. Paint5. Wood glue

    6. Hinges

    7. Steel tacks

    8. Finish screws