«»
Slip a metal band clamp over the lower end of the periscope box vent and press it onto the exhaust outlet. Holding the vent steady, tighten the clamp with a screwdriver until it feels snug.
Step 2: Tighten the clamp
Introduction
Overview
Step 1
Pull the dryer away from the wall
Step 2
Tighten the clamp
Step 3
Attach the periscope
Step 4
Join the box vent to the overhead duct
Step 5
Attach a 90-degree elbow
Step 6
Finish
«»
More in Workspaces
Tools List
-
Screwdriver
-
Dryer Vent Brush
Shopping List
1. ADJUSTABLE PERISCOPE BOX VENT
2. A VENT KIT
Including two 4-inch diameter * 4-foot-long round aluminum flex vent, two elbows, and two band clamps(whirlpool)
2. A VENT KIT
Including two 4-inch diameter * 4-foot-long round aluminum flex vent, two elbows, and two band clamps(whirlpool)
Contribute to This Story Below