«»
Pull the screen fabric tight with one hand as you roll the spline into the groove in the base strip.
Step 5: Install the Screening
Introduction
Step 1
Remove the Wood Battens
Step 2
Remove Old Screening
Step 3
Install Vertical Base Strips
Step 4
Trim the Base Strips
Step 5
Install the Screening
Step 6
Trim Away Excess
Step 7
Reinforce the Bottom Screens (optional)
Step 8
Install Wide Cap Trim
Step 9
Install Narrow Cap Trim
Step 10
Install Base Strip Trim
Step 11
Install the Screen Door
«»
Tools List
-
HAMMER
-
FLAT PRYBAR
-
UTILITY KNIFE
-
PLIERS
-
PRUNING SHEARS
-
SPLINE ROLLER
-
NON-MARRING MALLET
Shopping List
1. SCREENING
(included in the Screen Tight kit, or sold separately)
2. RUBBER SPLINE
(included in the Screen Tight kit, or sold separately)
(included in the Screen Tight kit, or sold separately)
2. RUBBER SPLINE
(included in the Screen Tight kit, or sold separately)
Contribute to This Story Below