Step 7: Mount the cabinet

Drive drywall screws through the holes in the side of the cabinet and into the blocking
Photo: Kolin Smith
«»


Fit the cabinet inside the blocking, and press all the edges of its face frame flush against the wall. Drive drywall screws through the holes in the side of the cabinet and into the blocking. If necessary, caulk around the edges of the cabinet to hide irregularities in the wall.
Ask TOH users about Bathroom

Contribute to This Story Below

    Tools List

    • studfinder
      Stud finder
    • utility knife
      Utility knife,
      to score drywall
    • keyhole saw
      Keyhole saw,
      to cut openings in wall
    • flashlight
      Flashlight
    • two-foot level
      Level
    • hacksaw blade
      Hacksaw blade,
      to cut drywall screws
    • hand saw
      Handsaw (to cut studs
    • rasp
      Rasp,
      to tailor the drywall opening to fit
    • drill
      Drill/driver

    Shopping List

    1. Medicine Cabinet: Look specifically for cabinets labeled "recessed," though a surface-mount cabinet can be converted into a recessed one, as long as its sides can slip into the wall cavity without obstruction.

    2. 2x4 Lumber: For the blocking, which makes the frame to which you'll fasten the cabinet. Use scraps if you have them, or one 8- to 10-foot piece should be enough.

    3. Construction Adhesive: To help attach the blocking.

    4. 21/2-inch Decking Screws: To fasten th blocking to the studs.

    5. 11/2-inch Drywall Screws: To hold the cut drywall edges to the blocking and to mount the cabinet.

    6. Caulk (as needed): To fill gaps between the cabinet frame and the wall.