Step 3: Measure & mark

measuring and marking where hooks will go to turn cornice into garden tool holder
Photo: Amy Rosenfeld
«»
Measure and mark where the hooks will go on the board's face (they should be an equal distance from each other and from the bottom edge of the cornice).
Ask TOH users about Salvage

Contribute to This Story Below

    Tools List

    • drill
      Cordless drill/driver
    • hammer
      Hammer
    • speed square
      Speed square or combination square
    • two-foot level
      Level
    • caulk gun
      Caulk gun
    • pencil compass
      Pencil

    Shopping List

    1. VINTAGE CORNICE

    2. SALVAGED WOOD BOARD

    3. WROUGHT IRON HOOKS
    try House of Antique Hardware

    4. L-SHAPED BRACKETS

    5. POLYURETHANE CONSTRUCTION ADHESIVE