Step 5: Mix The Stucco

Mix The Stucco
Photo: Reena Bammi
«»
Following the first-coat recipe, stir up a batch of stucco, using a wheelbarrow as a mixing bowl. The acrylic bonding agent added to this mix improves the adhesion of the new stucco to the old.
Next

Related Content

Ask TOH users about Siding
Discuss

Contribute to This Story Below

Add Comment

    More in House Exterior

    Tools List

    Close
    • drywall knife
      4-inch drywall knife,
      used to scrape off loose stucco
    • wire brush
      Wire brush,
      for cleaning scraped wall surfaces
    • flat blade shovel
      Shovel,
      used to mix stucco
    • wheelbarrow
      Mortar trough or wheelbarrow,
      for mixing stucco
    • plaster hawk
      Hawk,
      used to hold stucco while working
    • mason's trowel
      Trowel,
      for applying stucco to wall
    • rubber float
      Rubber float,
      used to smooth stucco patch

    Shopping List

    Close
    1. Portland cement
    one 94-lb. bag

    2. Brick or Mason’s sand

    3. Hydrated lime

    4. Acrylic bonding agent

    5. Builder’s paper
    Grade D

    6. Plastic sheeting

    7. Expanded metal lath
    (aka diamond mesh)

    8. Duct tape