Step 1: Connect to an outdoor faucet

CONNECTING TO AN OUTDOOR FAUCET
Photo: Shelly Strazis
«»
Screw the vacuum breaker to the pressure regulator, if your hose bib doesn't already have its own vacuum breaker. This part will prevent contaminated hose water from backwashing into the house's supply lines.

Attach the filter to the pressure regulator. Connect the hose swivel to the threaded opening jutting out from the side of the filter. This has a barbed end to accept the cut end of the tubing and hold it tight. Screw the entire assemblage to the hose bib.
Next

Related Content

Ask TOH users about Lawn Care
Discuss

Contribute to This Story Below

Add Comment

    More in Yard & Garden

    Tools List

    Close
    • tubing cutter
      Tubing Cutter,
      bypass pruner or scissors would suffice, but the thick tubing can dull the blades, making them less effective in the garden
    • 11-inch steel punch
      Hole Punch,
      comes with tubing

    Shopping List

    Close
    1. 1/2-INCH DRIP TUBING

    comes in 50-, 75- 100-, or 500-foot rolls, either with or without factory-installed emitters. Calculate the square footage of the area you want to irrigate, then figure on one foot of tubing per square foot of plant bed.




    2. 1/4-INCH DRIP TUBING

    use this smaller tubing to branch off from the main line and reach specific bushes, trees, or containers.



    3. TUBING CONNECTORS

    elbow, tee, and straight connectors allow you to turn the tubing without kinking it, or add on more lengths of tubing.



    4. WATER SOURCE CONNECTION KIT

    for attaching the tubing to an outdoor faucet. Kit should include a vacuum breaker, pressure regulator, a filter, and a connector for attaching the tubing.

    5. SPRAY AND DRIP ACCESSORIES

    including micro sprayers, small emitters, and foggers for reaching different plants around the garden.



    6. BARK MULCH