Overview

illustrated diagram of rolling grill table assembly
Illustration: Gregory Nemec
«»
Project Timeline
Saturday: Make the tabletop (Steps 1 - 7)

Sunday: Build and install the base (Steps 8-12)

Download the cut list and dimensional drawings for this rolling grill table.

Cut List and Hardware
1x4 cedar stiles: two @ 39 ½ inches
1x4 cedar rails: two at 15 inches
1x4 cedar slats: eight @ 30 inches
1x4 cedar legs: two @ 34 ½ inches
1x4 cedar legs: two @ 31 ¾ inches
1x4 cedar feet and brackets: ten @ 19 ¼ inches
1x4 cedar axle block: four @ 3 ½ inches
1x4 cedar foot pad: two @ 5 inches
1x4 cedar stretcher: one @ 28 ½ inches
1x4 cedar stretcher slat: one @ 21 ½ inches
-inch rod (aluminum or brass) two @ 17 inches
½-inch threaded galvanized rod, 13 threads per inch: one @ approximately 36 inches
Galvanized flat washers: four @ ½-inch-diameter center opening
Galvanized locknut: two @ ½ inch, 13 threads per inch
Plastic wheels: two Maxpower 335080 8-inch-by-1.75-inch Plastic Lawn Mower Wheels
Ask TOH users about Outdoor Kitchens

Contribute to This Story Below

    Tools List

    • miter saw
      Miter saw
    • bar clamps
      Bar clamps
    • straightedge guide
      Straightedge
    • router
      Router with ¾-inch straight bit
    • combination square
      Combination square
    • Doweling Jig
      -inch doweling jig. Go to rockler.com.
    • drill
      Drill/driver
    • 3/8-inch drill bit
      -inch drill bit
    • hacksaw
      Hacksaw
    • 1/16-inch drill bit with combination countersink
      1/16-inch drill bit with a combination countersink
    • bevel square
      Bevel gauge
    • circular saw
      Circular saw
    • 1/2-inch drill bit
      ½-inch drill bit

    Shopping List

    1. 1x4 cedar. Get seven 10-footers.

    2. -inch by-2-inch spiral-cut wood dowels

    3. -inch brass wood screws to attach the tabletop slats

    4. 1¼-inch deck screws

    5. -inch aluminum rod Get 34 inches.

    6. ½-inch threaded galvanized rod for the axle (36 inches, 13 threads per inch)

    7. ½-inch galvanized flat washers

    8. ½-inch locknuts (13 threads per inch)

    9. 8-inch-by-1¾-inch lawn-mower wheels

    10. Wood glue